Work Pass Quotas and Foreign Worker Levies in Singapore

<h1>Work Pass Quotas and Foreign Worker Levies in Singapore</h1> <p>Singapore's Ministry of Manpower (MOM) regulates the number of lower- and mid-skilled foreign workers in two ways: a quota that caps how many Work Permit and S Pass holders a firm may employ relative to its workforce, and a monthly foreign worker levy that employers pay for each holder. The Employment Pass has neither a quota nor a levy (see <a href="/en/knowledge/article/sgkb.daily-life.work-passes">work passes</a>; <a href="/en/knowledge/article/sgkb.business-industry.employment-pass-vs-s-pass">employment pass vs s pass</a>). The figures below were checked on MOM pages on 9 November 2026 and are reviewed regularly by MOM.</p> <h2>Dependency ratio ceilings by sector</h2> <p>A dependency ratio ceiling (DRC), or quota, is the maximum ratio of foreign workers to the total workforce that a company in a given sector can employ. MOM's current DRCs are 83.3% for construction and the process sector, 75% for marine shipyards, 60% for manufacturing and 35% for services. In the services sector, the total of Work Permit and S Pass holders cannot exceed 35% of the company's total workforce (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/foreign-worker-levy/what-is-the-foreign-worker-levy">MOM, Foreign worker quota and levy requirements, accessed 9 November 2026</a>).</p> <p>Further caps apply. Work Permit holders from the People's Republic of China (PRC) are limited to 8% of the workforce in services and 25% in manufacturing. S Pass holders are capped at 10% of the workforce in services and 15% in construction, manufacturing, marine shipyard and process (<a href="https://www.mom.gov.sg/passes-and-permits/s-pass/quota-and-levy/levy-and-quota-requirements">MOM, S Pass quota and levy requirements, accessed 9 November 2026</a>). In construction, the quota is expressed as five Work Permit holders for every local employee who earns the Local Qualifying Salary (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/construction-sector-requirements">MOM, Construction sector requirements, accessed 9 November 2026</a>).</p> <h2>How local employees count: the Local Qualifying Salary</h2> <p>MOM uses the company's CPF records to count local employees, so the quota depends on the CPF contributions and salaries the company declares. A Singapore Citizen or Permanent Resident employed under a contract of service, including a company director, counts as one local employee if earning at least S$1,800 a month and as half a local employee if earning S$900 to below S$1,800. The S$1,800 threshold is the Local Qualifying Salary (LQS), which the Budget 2026 booklet listed among measures to raise to S$1,800 from July 2026 (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/foreign-worker-levy/what-is-the-foreign-worker-levy">MOM, Foreign worker quota and levy requirements, accessed 9 November 2026</a>; <a href="https://cms.singaporebudget.gov.sg/assets/c149050e-809b-4003-9006-915b2386fa25">Ministry of Finance, Singapore Budget 2026 booklet, 12 February 2026</a>).</p> <p>The S Pass page says the quota is based on the average number of local employees in the last three months, updated every Saturday. Late or missing CPF contributions and salary declarations reduce quota and can push foreign workers into higher levy tiers (<a href="https://www.mom.gov.sg/passes-and-permits/s-pass/quota-and-levy/levy-and-quota-requirements">MOM, S Pass quota and levy requirements, accessed 9 November 2026</a>). See <a href="/en/knowledge/article/sgkb.cpf-social-security.cpf-contributions">cpf contributions</a> for the contribution rules.</p> <h2>Work Permit levy rates by sector</h2> <p>The levy is a pricing mechanism to regulate the number of foreigners in Singapore. For Work Permits it depends on the worker's skill classification and, in manufacturing and services, on how much of the quota the company uses. Liability starts when the Temporary Work Permit or Work Permit is issued and ends when the permit is cancelled or expires (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/foreign-worker-levy/what-is-the-foreign-worker-levy">MOM, Foreign worker quota and levy requirements, accessed 9 November 2026</a>). Monthly rates (basic-skilled / higher-skilled) as of 9 November 2026 are:</p> <ul> <li><strong>Services</strong>: up to 10% of workforce, S$450 / S$300; above 10% to 25%, S$600 / S$400; above 25% to 35%, S$800 / S$600 (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/services-sector-requirements">MOM, Services sector requirements, accessed 9 November 2026</a>).</li> <li><strong>Manufacturing</strong>: up to 25% of workforce, S$370 / S$250; above 25% to 50%, S$470 / S$350; above 50% to 60%, S$650 / S$550 (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/manufacturing-sector-requirements">MOM, Manufacturing sector requirements, accessed 9 November 2026</a>).</li> <li><strong>Construction</strong> (by source and skill, not tiered, from 1 January 2024): non-traditional sources S$900 basic-skilled and S$500 higher-skilled; Malaysia, North Asian sources and PRC S$700 and S$300; off-site construction S$370 and S$250. Workers approved without the required certification pay S$900 (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/construction-sector-requirements">MOM, Construction sector requirements, accessed 9 November 2026</a>).</li> </ul> <p>A daily rate, the monthly rate multiplied by 12 and divided by 365 and rounded up to the nearest cent, applies to months that a holder did not work in full. Construction also requires at least 10% of Work Permit holders to be higher-skilled (R1) before the firm can hire or renew basic-skilled (R2) workers (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/construction-sector-requirements">MOM, Construction sector requirements, accessed 9 November 2026</a>).</p> <h2>S Pass levy, higher-skilled status and 2028 changes</h2> <p>Since 1 September 2025 the S Pass levy has been harmonised at S$650 a month across all sectors and tiers, with a daily rate of S$21.37 for part-months, and employers should pay it by GIRO (<a href="https://www.mom.gov.sg/passes-and-permits/s-pass/quota-and-levy/levy-and-quota-requirements">MOM, S Pass quota and levy requirements, accessed 9 November 2026</a>).</p> <p>A Work Permit holder can qualify for the lower higher-skilled levy through academic qualifications, an ITE Skills Evaluation Test, relevant Workforce Skills Qualification certificates, or the Market-Based Skills Recognition Framework: in services, a fixed monthly salary of at least S$1,600 and at least four years as a Work Permit holder. Non-Malaysian holders in hotel, retail and food and beverage must also pass Workplace Literacy and Numeracy level 4 listening and speaking assessments (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/services-sector-requirements">MOM, Services sector requirements, accessed 9 November 2026</a>).</p> <p>Budget 2026 said Work Permit levies would be adjusted from 2028 (<a href="https://cms.singaporebudget.gov.sg/assets/c149050e-809b-4003-9006-915b2386fa25">Ministry of Finance, Singapore Budget 2026 booklet, 12 February 2026</a>). MOM states that from 2028 the current Tier 1 and Tier 2 will be merged in manufacturing, at S$300 for higher-skilled and S$470 for basic-skilled holders, and in services, at S$400 and S$600; MOM will release implementation details later (<a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/manufacturing-sector-requirements">MOM, Manufacturing sector requirements, accessed 9 November 2026</a>; <a href="https://www.mom.gov.sg/passes-and-permits/work-permit-for-foreign-worker/sector-specific-rules/services-sector-requirements">MOM, Services sector requirements, accessed 9 November 2026</a>).</p>

简介

新加坡工作准证配额与外籍员工税

新加坡人力部(MOM)通过两种方式管理低技能和中等技能外籍员工人数:一是配额,限制公司相对于其员工总数可雇用的工作准证和 S 准证持有人数量;二是雇主为每位持有人按月缴纳外籍员工税。就业准证没有配额或税费(参见工作准证;就业准证与 S 准证的比较)。以下数据已于 2026 年十一月 9 日在 MOM 网页上核对,并由 MOM 定期审查。

各行业的外籍员工比例上限

外籍员工比例上限(DRC),也称配额,是特定行业公司可雇用的外籍员工占员工总数的最高比例。MOM 当前的 DRC 为:建筑业和加工行业 83.3%、海事船厂 75%、制造业 60%、服务业 35%。在服务业,工作准证和 S 准证持有人的总数不得超过公司员工总数的 35%(MOM,《外籍员工配额和税费要求》,查阅于 2026 年十一月 9 日)。

此外还有其他上限。来自中华人民共和国(PRC)的工作准证持有人不得超过服务业员工总数的 8%,也不得超过制造业员工总数的 25%。服务业的 S 准证持有人上限为员工总数的 10%;建筑业、制造业、海事船厂和加工行业的上限为 15%(MOM,《S 准证配额和税费要求》,查阅于 2026 年十一月 9 日)。在建筑业,配额按每名符合本地资格薪金要求的本地员工对应五名工作准证持有人计算(MOM,《建筑业要求》,查阅于 2026 年十一月 9 日)。

本地员工如何计入:本地资格薪金

MOM 使用公司的公积金(CPF)记录来计算本地员工人数,因此配额取决于公司申报的 CPF 缴款和薪金。根据服务合同受雇的新加坡公民或永久居民(包括公司董事),月薪至少为 S$1,800 时计为一名本地员工;月薪为 S$900 至低于 S$1,800 时计为半名本地员工。S$1,800 的门槛即本地资格薪金(LQS);《2026 年财政预算案》手册将该金额列为从 2026 年七月起提高至 S$1,800 的措施之一(MOM,《外籍员工配额和税费要求》,查阅于 2026 年十一月 9 日;新加坡财政部,《新加坡 2026 年财政预算案手册》,2026 年二月 12 日)。

S 准证网页说明,配额根据过去三个月本地员工的平均人数计算,每周六更新。CPF 缴款或薪金申报延迟或缺漏会降低配额,并可能使外籍员工适用较高的税级(MOM,《S 准证配额和税费要求》,查阅于 2026 年十一月 9 日)。有关缴款规定,请参见公积金缴款。

各行业的工作准证税率

外籍员工税是一种调控新加坡外籍员工人数的价格机制。工作准证税额取决于员工的技能分类;在制造业和服务业,还取决于公司使用了多少配额。雇主自临时工作准证或工作准证签发时开始承担缴税责任,直到准证取消或到期为止(MOM,《外籍员工配额和税费要求》,查阅于 2026 年十一月 9 日)。截至 2026 年十一月 9 日的月税率(基本技能/较高技能)如下:

未完整工作的月份适用日税率,即月税率乘以 12,再除以 365,并向上取整至最接近的分。建筑业还要求工作准证持有人中至少有 10% 属于较高技能(R1),公司才能雇用或续聘基本技能(R2)员工(MOM,《建筑业要求》,查阅于 2026 年十一月 9 日)。

S 准证税费、较高技能身份与 2028 年的变更

自 2025 年九月 1 日起,所有行业和税级的 S 准证税额统一为每月 S$650;不足一个月的日税率为 S$21.37。雇主应通过 GIRO 缴纳税费(MOM,《S 准证配额和税费要求》,查阅于 2026 年十一月 9 日)。

工作准证持有人可通过学历、ITE 技能评估测试、相关劳动力技能资格证书,或市场技能认可框架取得较高技能身份,从而适用较低税率:在服务业,固定月薪至少为 S$1,600,且持有工作准证至少四年。酒店、零售和餐饮业的非马来西亚籍持有人还必须通过工作场所读写能力与计算能力第 4 级的听力和口语评估(MOM,《服务业要求》,查阅于 2026 年十一月 9 日)。

《2026 年财政预算案》表示,工作准证税费将在 2028 年调整(新加坡财政部,《新加坡 2026 年财政预算案手册》,2026 年二月 12 日)。MOM 表示,自 2028 年起,制造业当前的第 1 级和第 2 级将合并,较高技能持有人的税额为 S$300,基本技能持有人的税额为 S$470;服务业将合并为 S$400 和 S$600。MOM 将在之后公布实施细节(MOM,《制造业要求》,查阅于 2026 年十一月 9 日;MOM,《服务业要求》,查阅于 2026 年十一月 9 日)。